R-SIM3 Ultra S is in stock now!
R-SIM3 is the third generation of R-SIM card ,which can unlock your 4s without dialing 112 ,just insert it and unlock.
This is 3 generation of R-SIM card from gevey3.com.It supports for the IOS 5.1 GSM and IOS 5.01 GSM CDMA unlock!Now 5.1 can not be jailbreak ( unable to download and install the CYDIA source ), so 5.1 CDMA network is unable to unlock!
The other one,new generation with New packaging, Using F300 chip, High-quality micro Simcard tray! Not again cutting micro Simcard!Integration of the 26 state carriers, also can manually enter other countries carrier code.
R-SIM Rgknse Unlock Sim Card Description:
After several weeks’ extensive testing and rigorous verification, finally we will be able to deliver the R-SIM cards for unlock iPhone 4S.
This Turbo SIM Card works well with 3G, EDGE and supports MMS, FaceTime as well. It supports all Network SIM Cards 2G, 3G, WCDMA and claims to unlock iPhone 4S on iOS 5.0 and iOS 5.0.1 firmware. It unlocks ALL worldwide networks (including USA AT&T). The best part of this hardware unlock is that it doesn’t void your warranty since it doesn’t require any sort of hardware alteration or modification.
This R-SIM 3 card can unlock your iPhone 4S from iOS 5.0 to 5.0.1
100% warranty for the products.
R-SIM 3 Features:
• Rebel4S™ True Plug-and-Play Unlocking SIM Interposer
• No Need to Dial International Emergency Number 112
• Untethered Unlock with no Jailbreak Required
• Compatible with all GSM / WCDMA /CDMAiPhone 4S SIM Cards
• Complete Unlock with all 2G and 3G data services
• Works on iOS 5.0 / 5.0.1 / 5.1
• Full compatible Baseband 1.0.11 / 1.0.13 / 1.0.14 / 2.0.10
• Guaranteed Better Reception than Previous
• Decreased Power Consumption
• NO cutting,not support CDMA now
1 X R-SIM Unlock Turbo SIM Card for Apple iPhone 4s (New in box)
R SIM Rgknse Unlock Sim Card For iPhone 4S iOS 5 0 5 0 1 Tested Video
How to use R SIM for iPhone 4S Unlock Sim Review
With R-SIM (Rebel SIM), there is no need to jailbreak your iPhone4S device or change the normal SIM card. No need to cut the SIM card. Just insert the SIM card and insert the R-SIM in your iPhone (As shown in video demo). Then select your country and carrier.and it doesn’t require dialing 112 (after the first time initialization).
1.AssembleR-SIM Card;Frame;then the iPhone SIM card on top. Put them in the iPhone => Turn on iPhone => Settings => Phone =>SIMApplications. Then you will see the message below.
a.Click "Country & OPerators" then select your phone service provider (for example, if your phone service provider is AT&T, then you choose MODE 1 USA AT&T).Your phone service provider will appear on the top left corner of the screen. (See picture below).Then click the return (the triangle on top left ) back to the previous screen (SIM Applications).
b.Click the first one "ENTER 112 Mode" and back to the main menu.
c.Wait for the Message Window to appear them click "Accept". Wait for 5 seconds then dial 112. After connected, do not hang up. Slowly take the SIM card off the iPhone, then push the SIM cards back to the iPhone again. Wait for the iPhone to hang up itself (Note: Do not forcibly disconnect 112 by yourself).
d.Wait for the searching your phone service provider. If the top left corner shows the message "No Service", keep waiting until the phone service provider's name show up. Then the manual setup is completed. You can use your iPhone now. (If you turn off your iPhone,You would need to redo the set up again).
Automatic Setup of the iPhone
a.Assemble the R-SIM on the Card frame, then the iPhone SIM card on top. Put them in the iPhone => Turn on iPhone => Settings => Phone => SIM Applications.You will see the message below. Then select "*Auto Mode". Then select your phone service provider. Turn off the iPhone.
b.Turn on iPhone wait for the Unlock iPhone Message Window. Then click "Accept" (Note, after this setup you don't need to do the set up again).Wait for 5 seconds then dial 112. After connected, do not hang up. Slowly take the SIM card off the iPhone, then push the SIM cards back to the iPhone again . Wait for the iPhone to hang up itself (Note: Do not forcibly disconnect 112 by yourself)
C.Wait for the searching your phone service provider. If the top left corner shows the message "No Service", keep waiting until the phone service.provider's name show up. Then the manual setup is completed. You can use your iPhone now.
1.If theiPhone cannot find the phone service provider after searching long time, you can dial a workable phone number,after connected, wait until it hangs up itself. 2.If you cannot find your phone provider from "Country&operators", you can enter "MCC MNC" under "Edit Mode" to unlock your iPhone.
How to use R-SIM3 Ultra S
1,Assemble the R-SIM on the Card Frame, then the iPhone SIM card on top. Put them in the iPhone => Turn on iPhone => Settings => Phone => SIM Applications. Then you will see the message below.
2, if your phone service provider is AT&T, then you choose USA AT&T). If you can't find your operator , you can take your original operator SIM card , with the R-SIM3 card insert , click on " GetCarrierCode " , then , shutdown or restart , insert your SIM card , can be unlocked.
Write Your Own Review